Transmission joystick, customarily referred to as "block bar" or "gear."

The role is based on driving conditions linked gear shift.
Instructions:
First: the shift lever at the top of a linde forklift joystick, the king is the shift lever of the line, the middle of the shift lever is the neutral position, because the lower part of the shift lever has two lateral limit spring, shift lever In the neutral position, is limited to 3,4 files and horizontal crossroads, if you want to hang 1,2 file, you must shift the lever to the left, forward 1 file after 2 files, if you want to hang 5, R file, you must pull the lever to the right, forward 5 files after the R file, if you want to hang 3,4 files, neither to the left to pull, not right to pull, forward 3 files 4 files , If you want to change the gear lever from the first gear into the second gear, straight pull back on the line, after the T-junction can not let go, if you let go after the next pull into the 4 file, and if you want to shift lever from 2 files into 3 files, when the shift lever to the T-junction, a loose hand, the shift lever will automatically return to the (3,4 files and horizontal line) crossroads, and then push forward into 3 files. The other stalls are similar.
Second: Check whether the shift lever is neutral: the shift lever is only in the horizontal position is neutral when the horizontal position of the swing around the maximum amplitude, put up any one file, the swing amplitude significantly smaller , Which is the difference between whether the method is neutral.